Cha-Cha Bracelets

Materials:
12 mm Form Cha-Cha Bracelet or
15 mm Form Cha-Cha Bracelet
Brass Head Pins 2" Nickel Plated
(You will need 84 if using the 12 mm form or 126 if using the 15 mm form.)
Assorted Beads (your choice of size, shape and color)
Use pliers to make loop

INSTRUCTIONS
1. Begin by stringing the number of head pins you'll need to complete your bracelet. It is a good idea to vary the lengths of your head pins by stringing more or less beads, and varying your color groupings as you go. Make a 1/2" loop on the end of each head pin.

2. Open loop on first head pin sideways, hook the open loop onto the first band bar. Close the head pin loop, pressing the open end toward the beads.

3. Continue to attach head pins on every link, as you are working check to make sure that you are varying colors and lengths. If needed, make up short beaded head pins for filler.

Project Sheet Courtesy of "Darice"