|
Fringed Fleece Scarf & Throw
1. Use Fiskars Micro Tip Scissors to snip small holes along the edge of the scarf or throw. Holes should be approximately 1/2 inch from the edge, spaced about 1/2 inch apart. 2. Cut yarn into desired length strips. Twelve inches is a good length for the scarf, 8 inches for the throw. 3. Working with two strands at a time, fold the strands in half lengthwise and thread through the hole. 4. Pull the ends of the yarn through the loop and tighten. Repeat until all holes have yarn tied through them. Project copied with permission from Sierra Pacific Crafts |
Materials Needed:|
|
Printer-friendly version:
