Materials Needed:
Wreath measures approximately 15" in diameter.

INSTRUCTIONS:
Shape wire hanger into a ring, then bend hook for hanging loop OR use purchased wire ring.

Yarn Bundle (Make approximately 88): Wind yarn 20 times around a 4" piece of cardboard. Slip these strands off the cardboard. Then, with a separate 8" strand of yarn, tie strands together at center (see Figure 1); do not cut yarn loops.

Using the ends of the 8" strand, tie the bundle to the ring, positioning the bundle perpendicular to the wire (see Figure 2).

Make another bundle and tie to the ring adjacent to the previous bundle. Continue to make bundles and tie them to the wire in the same way, positioning each bundle against the previous bundle and working around the ring until the entire wire ring is filled.

Attach decorations; glue in place if necessary. Attach bow.

"This site is not endorsed by Coats & Clark."
© 2003 by Coats & Clark Inc.
Reproduced with permission from Coats & Clark Inc.