Jingle Bell Sign & Macrame Candy Cane

Our team of craft designers always come up with adorable projects that will inspire you. Today we are showing off these 2 Christmas crafts: Jingle Bell Sign & Macrame Candy Cane. Scroll down for the easy step-by-step instructions.

 
Print Friendly, PDF & Email

DIY Jingle Bell Sign

DIY Jingle Bell Sign

Here are the supplies needed to make a DIY Jingle Bell Sign:

(Supplies may vary by store, however, special store-to-store orders can be placed with a one-week turnaround. Substitutions will be suggested if a product is no longer available.)

Pallet Board Frame 24”x12”
Jingle Bell Swag
Stapler
“Jingle All The Way” Vinyl Rub-On
Credit Card or Scraper Tool

Step-by-Step Tutorial:

1. Rub the vinyl with a scraper tool and peel the backing off making sure all the vinyl sticks to the top layer.

2. Place the vinyl quote where you want it on your board and burnish again with a scraper. Peel away the top layer slowly making sure the vinyl is sticking to the surface as you go.

3. Hold the jingle bell swag at the height you want it and staple the jute hanger in place on the back side.

Pin it for later:

DIY Macrame Candy Cane

DIY Macrame Candy Cane

Here are the supplies needed to make a DIY Macramé Candy Cane:

(Supplies may vary by store, however, special store-to-store orders can be placed with a one-week turnaround. Substitutions will be suggested if a product is no longer available.)

Red and White yarn
10mm Macramé
3 Jingle Bells
6” Piece of Jute
1/16in Armature Wire
Pine Floral Pick
Scissors
Masking Tape

Step-by-Step Tutorial:

1. Cut an 8” piece of macramé and a 7” piece of wire.

2. Hold the armature wire 1/2in from the bottom of the macramé. Wrap, wire and macramé, with red yarn, tucking the end up while wrapping to hide it.

3. Stop at the end of the wire. Use a pencil to tuck the end of the yarn into the macramé. Repeat using the white yarn but space your wrapping out to create a stripe.

4. Using a piece of jute, tie on the floral pick. 

5. Using a piece of masking tape, wrap one end of the jute tightly and string on all three jingle bells. The tape will make it easier to string on the jingle bells.

6. Tie the jute tightly with a knot and trim the ends to the desired length.

Unravel the ends of the jute and macramé.

Pin it for later:

Print Friendly, PDF & Email

Store Locations: Bonney Lake, WA & Monroe, WA

Scroll to Top